MAGNETIC FILTER FOR HEATING SYSTEMS


The magnetic filter is specially designed for heating systems. It protects the installation of the heating system and underfloor heating by removing

the iron oxide accumulated, and by separating the sludge, sediments and unwanted particles. 


FEATURES OF MAGNETIC FILTER

  • Maximup operating pressure: 6 bar
  • Flaw <50 l/min
  • Maximum operating temperature: 95oC


BENEFITS OF MAGNETIC FILTER

  • Double filtering
  • Compact
  • Functional and esthetic
  • Leak proof with no need for damp foil
  • Easy cleaning and maintenance


MATERIALS OF MAGNETIC FILTER

  • Valves - fittings from brass UNE-EN 12165
  • High quality polyamide PA66


MOUNTING RECOMMENDATIONS

Filters can be installed in a variety of ways, for example: they can be installed anywhere in the main pipeline. It is recommended to install them after the last

radiator and before the boiler for the best protection effect of the boiler.


RECOMMENDED INSTALLATION POSITION

In two legends, location A is recommended as the best position for installation. Position B is suitable for pipes with narrow space. After washing

the system with a cleaning agent, make sure that the filter has been installed and rinsed on the system return line to achieve the best boiler protection effect.


COMPACT MAGNETIC FILTER

The magnetic filter is specially designed for heating systems. It protects the installation of the heating system and underfloor heating by removing the iron oxide

accumulated, and by separating the sludge, sediments and unwanted particles.



FEATURES OF COMPACT MAGNETIC FILTER

  • Maximup operating pressure: 6 bar
  • Flaw <50 l/min
  • Maximum operating temperature: 95oC


BENEFITS OF MAGNETIC FILTER

  • Max inlet pressure : 4bar
  • Flow : 87 l/min
  • Max operating temperature : 90oC
  • Installation : Horizontal or vertical
  • Body: Nylon reinforced with Fiberglass
  • Filter: AISI 304 Stainless Steel
  • Magnet from Neodymium: 9000G
  • Connection 3/4’’
  • Joints: EPDM


MATERIALS OF COMPACT MAGNETIC FILTER

  • Valves - fittings from brass UNE-EN 12165
  • High quality polyamide PA66


MOUNTING RECOMMENDATIONS

The filter unit must be installed under the boiler in the return of water. Choose the correct position (position A and B is recommended as the best). Water

connections 3/4”.


IMPORTANT: Before checking, cleaning or maintaining the unit, turn off the boiler, close the valves and wait for all components to cool before removing the dirt.